Metal Teeth ActionTrax
The version with 72 metal teeth bolted into the board, 18 at each end — where the tyre first bites and where wear is highest. Stainless steel digs into the surface harder than plastic, and each tooth is an ordinary 1/4-inch bolt: unscrew a worn one, screw in a new one, without sending anything back to the manufacturer.
What they are for
- Heavier vehicles — the manufacturer quotes 10,000–60,000 lbs, roughly 4.5–27 tonnes
- Hard frozen ground and ice, where plastic slips
- Expeditions to places you cannot quickly return from for a spare part
- Professional use: emergency services, rescue, rally
| Dimensions of one board | 113 × 32.71 × 10.79 cm |
|---|---|
| Weight per pair | 8.16 kg |
| Teeth | 72 bolted stainless steel teeth (1/4"-20 × 3/4" bolt with washer and nut) |
| Colours | black, orange, red, OD green |
| Supplied as | 2 boards |
| Made in | USA |
| Warranty | lifetime on defects, no weight or temperature limit |
What every ActionTrax board gives you
Quick-link system
Boards link end to end into a longer run — useful when the wheel has to travel more than one board length, or when you need to bridge a hole.
Handles sized for gloves
Oversized side handles work with gloves on, winter ones included. Sounds trivial until you have to pull buried boards out from under a vehicle at minus ten.
Replaceable teeth
The boards have factory-prepared holes for teeth. On the Metal Teeth version replacement means undoing one bolt and fitting another — no returns, no waiting.
UV protection
Increased UV resistance. Boards usually travel on the roof or on a rack — in full sun for the whole season.
Lifetime warranty
The manufacturer covers the boards with a lifetime warranty on defects, with no vehicle weight limit and no temperature restrictions. Teeth burnt by excessive wheel spin are excluded.
Made in the USA
The boards are made entirely in the United States. The design comes from an FAA-certified jet engine mechanic and Baja 1000 winner, with input from military units and professional off-road drivers.
Frequently asked questions
What do Metal Teeth ActionTrax boards weigh and what are the dimensions?
A pair weighs 8.16 kg, a single board measures 113 × 32.71 × 10.79 cm. They are always supplied as a pair.
Which colours are available?
In this version: black, orange, red, OD green. All are available in the Szekla4x4.pl shop.
What do I do when a tooth wears out?
Unscrew it and fit a new one. Each of the 72 teeth is an ordinary 1/4"-20 × 3/4" stainless bolt with a washer and nut, and the board has factory-made holes. Nothing needs to be sent back and there is no waiting for service.
Are Metal Teeth suitable for a light vehicle?
Yes, there is nothing against it. The manufacturer recommends them mainly for heavier vehicles and hard ground, but the metal teeth work just as well under an SUV. You pay more and carry just under a kilo extra.
Where can I buy Metal Teeth ActionTrax in Poland?
At Szekla4x4.pl, the authorised ActionTrax distributor for Poland. Local pickup in Warsaw or shipping across the European Union.
The other version
If lower weight and a construction with no serviceable parts matter more, look at the standard version.